|
|
Post by jamessinclair on Jul 30, 2008 12:42:41 GMT -5
When i try to configer my guitar for guitar zero everything works but the strummer (and i know it works) can some1 help me out.
|
|
|
|
Post by canped on Jul 30, 2008 12:59:51 GMT -5
its probably because you're configuring it while holding it and it's detecting the starpower tilt rather than the stumbar input. Try placing on a flat surface instead. If that doesn't work, try updating the xbox controller drivers and if that still doesn't work, get the xpadder program and configure the strum to a keyboard input.
|
|
|
|
Post by jamessinclair on Jul 30, 2008 14:02:22 GMT -5
I tryed keeping it steady but it still doesnt reconize it i updated it to but I cant get it to work.
|
|
|
|
Post by canped on Jul 30, 2008 14:09:38 GMT -5
Keeping it steady won't work if it's still upright- it needs to be placed down flat.
|
|
|
|
Post by jamessinclair on Jul 30, 2008 14:29:32 GMT -5
I tryed everything it wont work and im not sure wat to do
|
|
|
|
Post by canped on Jul 30, 2008 14:31:47 GMT -5
get xpadder
|
|
|
|
Post by jamessinclair on Jul 30, 2008 14:33:02 GMT -5
will it make me able to strum using the guitar?
|
|
|
|
Post by canped on Jul 30, 2008 14:35:59 GMT -5
Yes- it maps the input of your guitar to a selected keyboard key. Map strum up to C and strum fown to V and then set the strum to c and v in the control config.
|
|
|
|
Post by jamessinclair on Jul 30, 2008 14:45:24 GMT -5
hey i downloaded xpadder but it wont open up whats with that?
|
|
|
|
Post by iamdaddy on Jul 30, 2008 15:07:40 GMT -5
unless something hjas changed, when using xpadder for GZ one must actually set all the inputs (frets as well) to keyboard controls. I think GZ only allows for either keyboard or controller configurations. I may be wrong. I would set the frets as 1-5 in xpadder and the strum as C and V like canped mentioned, then when you match these to the controls in GZ, your guitar will be playing the relevant keyboard buttons. As for xpadder not loading, well its a standard executable file and should boot fine. Perhaps you got a corrupt download? I would try again maybe?
<EDIT> Hail the almighty power of smite
|
|
|
|
Post by jamessinclair on Jul 30, 2008 15:10:56 GMT -5
Ya i was trying to get xpadder working for an hour and it wont open
|
|
|
|
Post by iamdaddy on Jul 30, 2008 15:49:51 GMT -5
u double click it then it hides aways in the systray
|
|
|
|
Post by jamessinclair on Aug 4, 2008 18:48:59 GMT -5
hey how do i make the guitar strum using xpadder i got it working
|
|
|
|
Post by canped on Aug 4, 2008 18:53:22 GMT -5
Map the stum input to keyboard keys (read the help file in xpadder to learn how to do this) then set the keys as the strum buttons in GZ.
|
|
|
|
Post by emerald876 on Aug 4, 2008 22:01:32 GMT -5
I think you're using the original GZ. The one that actually says career on it, but career or training doesnt work. Yeah....
That version has a problem with the x-plorer. It wont map the strum bar. Ditch it and get the new ones.
|
|
