Post by hzac on Jan 30, 2008 2:21:28 GMT -5
BEFORE WE START YOU DO NOT NEED XBCD AT ALL FOR GUITAR ZERO 2/ GUITAR STAR!
Also, Before you do anything else try this first (regardless of controller):
DEFAULT CONFIG SETUP
1-start the game and navigate to options>input>player 1 using the keyboard
2-Change 'keyboard' to 'gamepad 0'
3-Configure each button
4-Back out to the main menu using the keyboard. You'll get a message saying you need to restart and to press a button to shut down. Do it.
5-Restart GuitarStar to play using your Guitar.
Now.. if that didnt work. Please find your controller below and follow the instructions give.
[shadow=black,left,400]Any PS2 guitar controller:[/shadow]
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
For this you will need a ps2 – usb converter (if you dont have one.. google it)
Simply download this config file and replace the one in your guitar star directory with it.
Just remember to back up your files first... And make sure you edit the new config according to your setup.
Download here: www.savefile.com/files/1349531 (thanks to mental preouts even though i accidently deleted his thread lol)
Or if this setupd did not work.. please try the below
PS2 Black and Red SG Controller (thanks to wizrad for this super job)
*Note: This setup is for Users who are NOT using the Super Dual Box Pro or the Super Joy Box 3 Pro USB Adaptor. This is for ppl who have different USB adaptors and need to utilize Joy2key to be able to use the Black and Red SG Guitar Hero Controllers. Whammy will NOT work on the guitar with this setup due to a limitation of the USB adaptor, but you can set the whammy up to use a key on the keyboard in the Game input settings.
1. Install any drivers needed for the PS2-USB adaptor.
2. Plug in the Adaptor and then the Guitar.
3. Navigate on your computer to Start/Control Panel/Game Controllers. In the window that opens, highlight your newly installed adaptor and click properties. Press each button on your guitar and note what buttons activate in the game controller panel. ( I.E. Green fret button activates button 6 in the button test window as seen below). Make sure to write these down as you will need them later to configure Joy2Key.
Guitar Button / Game Controller Panel Result
Star Power / Tilt Guitar = Button 5, Select Button = Button 9
Start / Button 10
Strum Down / X Axis Down
Strum Up / X Axis Up
Green Fret / Button 6
Red Fret / Button 2
Yellow Fret / Button 1
Blue Fret / Button 3
Orange Fret / Button 4
* Again, Whammy will not work as some adpators will not recognize it.
4. Open the game and navigate to Options/Input/Player 1. Set the Controller option to Keyboard with the following settings:
Keyboard Settings
Starpower = Spacebar Key
Start = Escape Key
Strum Down = Down Arrow Key
Strum Up = Up Arrow Key
Fret 1 = F1 Key
Fret 2 = F2 Key
Fret 3 = F3 Key
Fret 4 = F4 Key
Fret 5 = F5 Key
Whammy = Backspace Key (can only be used with keyboard)
Scroll to the bottom of the input page and save your settings.
5. Navigate to the Joy2Key website and download Joy2Key. Unzip it to
www.electracode.com/4/joy2key/JoyToKey%20English%20Version.htm
a folder and click the .exe file.
6. With Joy2Key open, Highlight the name in the left window and rename your configuration to whatever you like, or create a new settings file. In the right window, we want to find the buttons in the list that we got from step 3, so that we can emulate the guitar button presses to the keyboard keys. So for Starpower, find and double click Button 5 in the list and a new window will open. At the top of this window, Click the "Keyboard" tab, and in the very top text box on the left, highlight the word "disabled" and press the spacebar. Now click the "OK" button to go back to the main list. This has now assigned button 5 of the Guitar (the tilting action) to the keyboard Spacebar, which will activate Starpower. Now assign button 9 in Joy2Key as the spacebar also (the select button on the guitar). Continue on with the rest of the buttons to configure Joy2Key.
7. Once finished assigning buttons in Joy2Key, DO NOT close it, but minimize it. You must have Joy2Key running in order for it to work. Open Guitar Star, and you should be able to play with your PS2 Guitar Hero SG.
For those that want the lazy man's way, Below is the Joy2Key config file. Just place it in the same folder as the Joy2Key .exe.
www.savefile.com/files/1351068
Below is my Config.xml page that should be setup with the keyboard buttons assigned. Just replace your existing Config.xml page in your Guitar Star directory. Don't forget to change any other settings to your prefence at the top of the page.
www.savefile.com/files/1352765
---
if that doesnt work try this:
wizrad, your tutorial is perfect, except for one thing... If you want the whammy bar to work (I guarantee this will work with PS2 guitar and Super Dual Box Pro adapter), you have to, in the joystick properties, do this:
"Click the Controller Mode button from the bottom left corner and change Direction Buttons Mode to Auto and Controller Mode to Analog".
And in JoyToStick you have to do this:
"From the right side select Preferences tab and choose Use POV Switches".
And the new keys are (in JoyToStick):
UP = Whammy
POV1:UP = Strum up
POV1:DOWN = Strum down
Button1 = Yellow fret
Button2 = Red fret
Button3 = Blue fret
Button4 = Orange fret
Button5 = Tilt
Button6 = Green fret
Button9 = Start
Button10 = Select
Also, drivers for those who can't find them:
Win 98/Me/2000/XP: www.mayflash.com/Download/Super5%20pro.EXE
Vista: www.mayflash.com/Download/Super%20Dual%20Box%20Pro%20vista.exe
------------------------------------------------------------------------------------------
[shadow=black,left,400]Rockband Guitar Controller:[/shadow]
Xbox 360 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
1. start menu -> Right click my computer -> Click Manage
2. A window will pop up. On the left side click device manager
3. find the 'Harmonix Guitar for the Xbox 360'
4. right click -> update driver
5. search automatically
6. wait. If it finds a driver and installs, test it ingame with ‘DEFAULT CONFIG SETUP’ instructions.
7. If that doesn't work.. download the xbox 360 controller drivers from here www.microsoft.com/hardware/gaming/download.mspx
8. Once driver is downloaded ,Repeat process from step 1 but this time click browse my computer
9. select xbox 360 controller for windows version [latest] that you downloaded
10. next
11. it should work now
PS3 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
First off, Open up guitar star and proceed to the Options section. Select input then player 1.
Make sure that the controller 'keyboard' is selected, this is very important. Now configure the following settings to match this:
Starpower: Space
Start: Escape
Strum down: arrow down
Strum Up: arrow up
Fret 1 (green): Enter
Fret 2 (red): 2
Fret 3 (yellow): 3
Fret 4 (blue): 4
Fret 5 (orange): 5
Whammy: Tab
and proceed to save changes, press enter.
Exit the game.
Ok now, Plug in your ps3 controller to the usb, enable windows to recognise and automatically install the drivers for you (dont even think about downloading xbcd.. its usless)
Once this is done I want you to click this link below and it will download a program called joy2key.
www.electracode.com/4/joy2key/JoyToKey%20English%20Version_files/jtk374en.zip
Unzip it to a designated place on your computer (your choice)
Ok now, download my custom configuration file for it here
www.savefile.com/files/1415644
Once this has finished downloading, place this .cfg in the same directory as the joy2key.exe (or whatever its called) and then run joy2 key.
Now simply select the configuration file and your done. BUT DO NOT CLOSE JOY2KEY.
This is important.. joy2key must be left open for the controller to work in game. It must be started before you start the game and exited after you finish. I know its a pain but if you dont open it it wont work and if you leave it open your contoller will pretty much be able to run your computer lol
------------------------------------------------------------------------------------------
[shadow=black,left,400]Microsoft X-plorer Guitar Controller:[/shadow]
Xbox 360 Version (der):
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
1. start menu -> Right click my computer -> Click Manage
2. A window will pop up. On the left side click device manager
3. find the x-plorer
4. right click -> update driver
5. search automatically
6. wait. If it finds a driver and installs, test it ingame with ‘DEFAULT CONFIG SETUP’ instructions.
7. If that doesn't work.. download the xbox 360 controller drivers from here www.microsoft.com/hardware/gaming/download.mspx
8. Once driver is downloaded ,Repeat process from step 1 but this time click browse my computer
9. select xbox 360 controller for windows version [latest] that you downloaded
10. next
11. it should work now
------------------------------------------------------------------------------------------
[shadow=black,left,400]Guitar hero 3 Guitar Controller (Les Paul) :[/shadow]
PC Version:
Again, I honestly have no idea. Pm me if you are having trouble and ill sort it out with you easily using joy2key
PS3 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
First off, Open up guitar star and proceed to the Options section. Select input then player 1.
Make sure that the controller 'keyboard' is selected, this is very important. Now configure the following settings to match this:
Starpower: Space
Start: Escape
Strum down: arrow down
Strum Up: arrow up
Fret 1 (green): Enter
Fret 2 (red): 2
Fret 3 (yellow): 3
Fret 4 (blue): 4
Fret 5 (orange): 5
and proceed to save changes, press enter.
Exit the game.
Ok now, Plug in your ps3 controller to the usb, enable windows to recognise and automatically install the drivers for you (dont even think about downloading xbcd.. its usless)
Once this is done I want you to click this link below and it will download a program called joy2key.
www.electracode.com/4/joy2key/JoyToKey%20English%20Version_files/jtk374en.zip
Unzip it to a designated place on your computer (your choice)
Ok now, download my custom configuration file for it here
www.mediafire.com/?3xwlccbqrxj
Once this has finished downloading, place this .cfg in the same directory as the joy2key.exe (or whatever its called) and then run joy2 key.
Now simply select the configuration file and your done. BUT DO NOT CLOSE JOY2KEY.
This is important.. joy2key must be left open for the controller to work in game. It must be started before you start the game and exited after you finish. I know its a pain but if you dont open it it wont work and if you leave it open your contoller will pretty much be able to run your computer lol
Xbox 360 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
1. start menu -> Right click my computer -> Click Manage
2. A window will pop up. On the left side click device manager
3. find the Les paul controller (dont know what its called sorry.
4. right click -> update driver
5. search automatically
6. wait. If it finds a driver and installs, test it ingame with ‘DEFAULT CONFIG SETUP’ instructions.
7. If that doesn't work.. download the xbox 360 controller drivers from here www.microsoft.com/hardware/gaming/download.mspx
8. Once driver is downloaded ,Repeat process from step 1 but this time click browse my computer
9. select xbox 360 controller for windows version [latest] that you downloaded
10. next
11. it should work now
Nintendo Wii GH3 Controller (100 awesome credits to cosmokramer for doing this for you guys)
What you need:
Bluetooth USB adapter
BlueSoleil www.bluesoleil.com/download/
GlovePie carl.kenner.googlepages.com/glovepie_download
GZ2 GlovePie Script w/Whammy www.mediafire.com/?0ouaygbkma9
What to do:
Connecting the Wiimote to you Computer
1. Make sure the USB bluetooth adapter is connected to your computer
2. Open BlueSoleil
3. Press the 1 and 2 buttons on the WiiMote so that all 4 blue lights are blinking. (an alternative is to take the battery cover off and press the little red button)
4. Click on the Orange Sphere in BlueSoleil WHILE THE LIGHTS ARE FLASHING to find the WiiMote. Once the orange sphere is clicked, it should find a new device. If the WiiMote is not discovered or the lights stopped blinking, then repeast step 3
5. Double click the new device and now the device should say "Nintendo RVL-CNT-01" or something similar. If the lights are not blinking on the WiiMote, then repeat Step 3 again. and then follow step 5.
6. Right click on the "Nintendo RVL-CNT-01" and then go to "Connect" and select "Bluetooth Human Interface Device Service"
7. BlueSoleil will automatically install the drivers for the WiiMote. A window might come up asking if you want to "Continue Installation" or "Stop Installation". Click Continue Installation.
8. If everything went fine, there should be a green line attached from the Wiimote to the Orange Sphere.
Getting GloviePie to work with Guitar Zero 2 and the Wiimote
1. Open GlovePie
2. Click "Troubleshooter" on top and then make sure "Bluetooth Fix" is checked.
3. Click "File" and the open the GlovePie script that you downloaded (The link is above)
4. Click RUN
5. You should now have only 1 blue led lit on the WiiMote. Success.
6. Put the WiiMote in the WiiGuitar.
6. Open Guitar Zero 2 and map the button from the WiiGuitar.
If you guys have any further problems or anything to add please let me know in this thread. Oh and Fyi.. I only own a gh2 wireless controller.. all the other informationwas gathered with my mind... so dont hate.
oh and this thread is WIP so stfu
Also, Before you do anything else try this first (regardless of controller):
DEFAULT CONFIG SETUP
1-start the game and navigate to options>input>player 1 using the keyboard
2-Change 'keyboard' to 'gamepad 0'
3-Configure each button
4-Back out to the main menu using the keyboard. You'll get a message saying you need to restart and to press a button to shut down. Do it.
5-Restart GuitarStar to play using your Guitar.
Now.. if that didnt work. Please find your controller below and follow the instructions give.
[shadow=black,left,400]Any PS2 guitar controller:[/shadow]
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
For this you will need a ps2 – usb converter (if you dont have one.. google it)
Simply download this config file and replace the one in your guitar star directory with it.
Just remember to back up your files first... And make sure you edit the new config according to your setup.
Download here: www.savefile.com/files/1349531 (thanks to mental preouts even though i accidently deleted his thread lol)
Or if this setupd did not work.. please try the below
PS2 Black and Red SG Controller (thanks to wizrad for this super job)
*Note: This setup is for Users who are NOT using the Super Dual Box Pro or the Super Joy Box 3 Pro USB Adaptor. This is for ppl who have different USB adaptors and need to utilize Joy2key to be able to use the Black and Red SG Guitar Hero Controllers. Whammy will NOT work on the guitar with this setup due to a limitation of the USB adaptor, but you can set the whammy up to use a key on the keyboard in the Game input settings.
1. Install any drivers needed for the PS2-USB adaptor.
2. Plug in the Adaptor and then the Guitar.
3. Navigate on your computer to Start/Control Panel/Game Controllers. In the window that opens, highlight your newly installed adaptor and click properties. Press each button on your guitar and note what buttons activate in the game controller panel. ( I.E. Green fret button activates button 6 in the button test window as seen below). Make sure to write these down as you will need them later to configure Joy2Key.
Guitar Button / Game Controller Panel Result
Star Power / Tilt Guitar = Button 5, Select Button = Button 9
Start / Button 10
Strum Down / X Axis Down
Strum Up / X Axis Up
Green Fret / Button 6
Red Fret / Button 2
Yellow Fret / Button 1
Blue Fret / Button 3
Orange Fret / Button 4
* Again, Whammy will not work as some adpators will not recognize it.
4. Open the game and navigate to Options/Input/Player 1. Set the Controller option to Keyboard with the following settings:
Keyboard Settings
Starpower = Spacebar Key
Start = Escape Key
Strum Down = Down Arrow Key
Strum Up = Up Arrow Key
Fret 1 = F1 Key
Fret 2 = F2 Key
Fret 3 = F3 Key
Fret 4 = F4 Key
Fret 5 = F5 Key
Whammy = Backspace Key (can only be used with keyboard)
Scroll to the bottom of the input page and save your settings.
5. Navigate to the Joy2Key website and download Joy2Key. Unzip it to
www.electracode.com/4/joy2key/JoyToKey%20English%20Version.htm
a folder and click the .exe file.
6. With Joy2Key open, Highlight the name in the left window and rename your configuration to whatever you like, or create a new settings file. In the right window, we want to find the buttons in the list that we got from step 3, so that we can emulate the guitar button presses to the keyboard keys. So for Starpower, find and double click Button 5 in the list and a new window will open. At the top of this window, Click the "Keyboard" tab, and in the very top text box on the left, highlight the word "disabled" and press the spacebar. Now click the "OK" button to go back to the main list. This has now assigned button 5 of the Guitar (the tilting action) to the keyboard Spacebar, which will activate Starpower. Now assign button 9 in Joy2Key as the spacebar also (the select button on the guitar). Continue on with the rest of the buttons to configure Joy2Key.
7. Once finished assigning buttons in Joy2Key, DO NOT close it, but minimize it. You must have Joy2Key running in order for it to work. Open Guitar Star, and you should be able to play with your PS2 Guitar Hero SG.
For those that want the lazy man's way, Below is the Joy2Key config file. Just place it in the same folder as the Joy2Key .exe.
www.savefile.com/files/1351068
Below is my Config.xml page that should be setup with the keyboard buttons assigned. Just replace your existing Config.xml page in your Guitar Star directory. Don't forget to change any other settings to your prefence at the top of the page.
www.savefile.com/files/1352765
---
if that doesnt work try this:
wizrad, your tutorial is perfect, except for one thing... If you want the whammy bar to work (I guarantee this will work with PS2 guitar and Super Dual Box Pro adapter), you have to, in the joystick properties, do this:
"Click the Controller Mode button from the bottom left corner and change Direction Buttons Mode to Auto and Controller Mode to Analog".
And in JoyToStick you have to do this:
"From the right side select Preferences tab and choose Use POV Switches".
And the new keys are (in JoyToStick):
UP = Whammy
POV1:UP = Strum up
POV1:DOWN = Strum down
Button1 = Yellow fret
Button2 = Red fret
Button3 = Blue fret
Button4 = Orange fret
Button5 = Tilt
Button6 = Green fret
Button9 = Start
Button10 = Select
Also, drivers for those who can't find them:
Win 98/Me/2000/XP: www.mayflash.com/Download/Super5%20pro.EXE
Vista: www.mayflash.com/Download/Super%20Dual%20Box%20Pro%20vista.exe
------------------------------------------------------------------------------------------
[shadow=black,left,400]Rockband Guitar Controller:[/shadow]
Xbox 360 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
1. start menu -> Right click my computer -> Click Manage
2. A window will pop up. On the left side click device manager
3. find the 'Harmonix Guitar for the Xbox 360'
4. right click -> update driver
5. search automatically
6. wait. If it finds a driver and installs, test it ingame with ‘DEFAULT CONFIG SETUP’ instructions.
7. If that doesn't work.. download the xbox 360 controller drivers from here www.microsoft.com/hardware/gaming/download.mspx
8. Once driver is downloaded ,Repeat process from step 1 but this time click browse my computer
9. select xbox 360 controller for windows version [latest] that you downloaded
10. next
11. it should work now
PS3 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
First off, Open up guitar star and proceed to the Options section. Select input then player 1.
Make sure that the controller 'keyboard' is selected, this is very important. Now configure the following settings to match this:
Starpower: Space
Start: Escape
Strum down: arrow down
Strum Up: arrow up
Fret 1 (green): Enter
Fret 2 (red): 2
Fret 3 (yellow): 3
Fret 4 (blue): 4
Fret 5 (orange): 5
Whammy: Tab
and proceed to save changes, press enter.
Exit the game.
Ok now, Plug in your ps3 controller to the usb, enable windows to recognise and automatically install the drivers for you (dont even think about downloading xbcd.. its usless)
Once this is done I want you to click this link below and it will download a program called joy2key.
www.electracode.com/4/joy2key/JoyToKey%20English%20Version_files/jtk374en.zip
Unzip it to a designated place on your computer (your choice)
Ok now, download my custom configuration file for it here
www.savefile.com/files/1415644
Once this has finished downloading, place this .cfg in the same directory as the joy2key.exe (or whatever its called) and then run joy2 key.
Now simply select the configuration file and your done. BUT DO NOT CLOSE JOY2KEY.
This is important.. joy2key must be left open for the controller to work in game. It must be started before you start the game and exited after you finish. I know its a pain but if you dont open it it wont work and if you leave it open your contoller will pretty much be able to run your computer lol
------------------------------------------------------------------------------------------
[shadow=black,left,400]Microsoft X-plorer Guitar Controller:[/shadow]
Xbox 360 Version (der):
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
1. start menu -> Right click my computer -> Click Manage
2. A window will pop up. On the left side click device manager
3. find the x-plorer
4. right click -> update driver
5. search automatically
6. wait. If it finds a driver and installs, test it ingame with ‘DEFAULT CONFIG SETUP’ instructions.
7. If that doesn't work.. download the xbox 360 controller drivers from here www.microsoft.com/hardware/gaming/download.mspx
8. Once driver is downloaded ,Repeat process from step 1 but this time click browse my computer
9. select xbox 360 controller for windows version [latest] that you downloaded
10. next
11. it should work now
------------------------------------------------------------------------------------------
[shadow=black,left,400]Guitar hero 3 Guitar Controller (Les Paul) :[/shadow]
PC Version:
Again, I honestly have no idea. Pm me if you are having trouble and ill sort it out with you easily using joy2key
PS3 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
First off, Open up guitar star and proceed to the Options section. Select input then player 1.
Make sure that the controller 'keyboard' is selected, this is very important. Now configure the following settings to match this:
Starpower: Space
Start: Escape
Strum down: arrow down
Strum Up: arrow up
Fret 1 (green): Enter
Fret 2 (red): 2
Fret 3 (yellow): 3
Fret 4 (blue): 4
Fret 5 (orange): 5
and proceed to save changes, press enter.
Exit the game.
Ok now, Plug in your ps3 controller to the usb, enable windows to recognise and automatically install the drivers for you (dont even think about downloading xbcd.. its usless)
Once this is done I want you to click this link below and it will download a program called joy2key.
www.electracode.com/4/joy2key/JoyToKey%20English%20Version_files/jtk374en.zip
Unzip it to a designated place on your computer (your choice)
Ok now, download my custom configuration file for it here
www.mediafire.com/?3xwlccbqrxj
Once this has finished downloading, place this .cfg in the same directory as the joy2key.exe (or whatever its called) and then run joy2 key.
Now simply select the configuration file and your done. BUT DO NOT CLOSE JOY2KEY.
This is important.. joy2key must be left open for the controller to work in game. It must be started before you start the game and exited after you finish. I know its a pain but if you dont open it it wont work and if you leave it open your contoller will pretty much be able to run your computer lol
Xbox 360 Version:
Important: make sure you plug the f***in thing in lol (let it install and register or whatever first)
1. start menu -> Right click my computer -> Click Manage
2. A window will pop up. On the left side click device manager
3. find the Les paul controller (dont know what its called sorry.
4. right click -> update driver
5. search automatically
6. wait. If it finds a driver and installs, test it ingame with ‘DEFAULT CONFIG SETUP’ instructions.
7. If that doesn't work.. download the xbox 360 controller drivers from here www.microsoft.com/hardware/gaming/download.mspx
8. Once driver is downloaded ,Repeat process from step 1 but this time click browse my computer
9. select xbox 360 controller for windows version [latest] that you downloaded
10. next
11. it should work now
Nintendo Wii GH3 Controller (100 awesome credits to cosmokramer for doing this for you guys)
What you need:
Bluetooth USB adapter
BlueSoleil www.bluesoleil.com/download/
GlovePie carl.kenner.googlepages.com/glovepie_download
GZ2 GlovePie Script w/Whammy www.mediafire.com/?0ouaygbkma9
What to do:
Connecting the Wiimote to you Computer
1. Make sure the USB bluetooth adapter is connected to your computer
2. Open BlueSoleil
3. Press the 1 and 2 buttons on the WiiMote so that all 4 blue lights are blinking. (an alternative is to take the battery cover off and press the little red button)
4. Click on the Orange Sphere in BlueSoleil WHILE THE LIGHTS ARE FLASHING to find the WiiMote. Once the orange sphere is clicked, it should find a new device. If the WiiMote is not discovered or the lights stopped blinking, then repeast step 3
5. Double click the new device and now the device should say "Nintendo RVL-CNT-01" or something similar. If the lights are not blinking on the WiiMote, then repeat Step 3 again. and then follow step 5.
6. Right click on the "Nintendo RVL-CNT-01" and then go to "Connect" and select "Bluetooth Human Interface Device Service"
7. BlueSoleil will automatically install the drivers for the WiiMote. A window might come up asking if you want to "Continue Installation" or "Stop Installation". Click Continue Installation.
8. If everything went fine, there should be a green line attached from the Wiimote to the Orange Sphere.
Getting GloviePie to work with Guitar Zero 2 and the Wiimote
1. Open GlovePie
2. Click "Troubleshooter" on top and then make sure "Bluetooth Fix" is checked.
3. Click "File" and the open the GlovePie script that you downloaded (The link is above)
4. Click RUN
5. You should now have only 1 blue led lit on the WiiMote. Success.
6. Put the WiiMote in the WiiGuitar.
6. Open Guitar Zero 2 and map the button from the WiiGuitar.
If you guys have any further problems or anything to add please let me know in this thread. Oh and Fyi.. I only own a gh2 wireless controller.. all the other informationwas gathered with my mind... so dont hate.
oh and this thread is WIP so stfu